Two unique, features enable single-handed, fast and accurate alignment of all materials, irrespective of thickness. The Lift-and-Hover system enables the clamping bar to be easily raised and then lowered so it hovers just above the material surface. The anti-sag mechanism means the cutter bar can be suspended exactly parallel to the media surface over the whole length of the cut with zero sag. The QuikSwap heads can be rapidly changed to provide general cutting, creasing or fabric cutting, and you are always guaranteed ultra-high 0.2mm (0.008″) precision accuracy with every cut.
The BenchTop will cut the following materials:
Semi-rigid materials
Corrugated cardboard ≤ 13mm (1/2″)
PVC foamboard ≤ 13mm (1/2″)
Corrugated plastic ≤ 13mm (1/2″)
Foam centred board ≤ 13mm (1/2″)
Rigid materials
Cast acrylic / Plexiglas ≤ 3mm (3/32″) scoring only
Aluminium composite panel, e.g. DiBond ≤ 3mm (3/32″) Rocker tool head only
Flexible materials
Banners
Pop-ups
Magnetic sheets
Film
Self-adhesive vinyls
Textiles
Delicate materials: tissue paper, wallpaper
SKU:
Guaranteed accuracy - The Evolution3 is the most accurate cutter of its type on the market and is guaranteed to cut within 0.2mm (0.008″) of a straight line for the full length of the cut. The in-built ultra-precision accuracy, combined with the perfect alignment made possible using the sightline strip, means every butt-jointed panel will join seamlessly. This ultra-precision accuracy will save you time and money with less waste and fewer mistakes.
Total stability - The self-adjusting track roller system fitted to the QuikSwap tool heads provides a strong and smooth movement up and down the length of the cutter bar, with zero sideways movement to ensure a perfect straight line. This, coupled with rigid blade clamping, gives perfect blade control and spot-on accuracy, so less wastage and mistakes.
The ability to cut aluminium composite on a bench top- The introduction of the optional Rocker QuikSwap tool head allows you to cut aluminium composite panel, e.g. DiBond, on the Evolution3. It is not a one-pass finished cut like the SteelTrak, but by using a Tech-D.012 blade, with a few careful strokes you can achieve a clean cut.
Heavy duty reliability - The entire Evolution3 range has been built to last using high quality materials and well tested engineering principles. The cutting head bearing system and clamping are tough enough to keep perfect blade control, even with the most difficult of materials. Keencut makes the majority of components on its precision CNC machines keeping tolerances and quality under constant control, this assures exceptional accuracy and total reliability.
• Standard next day delivery to the Republic of Ireland.
• Standard two day service to the UK, Delivery is charged at €18/£18 per order, Bulkier orders may need to be shipped by pallet incurring a charge of €50/£50 per order.
Please allow minimum of 1 hour for collection after placing your initial order.
Our opening hours are Monday - Thursday 8.30am - 5.30pm and Friday 8.30am - 5pm.
We also remain open for your convenience during lunch hours between 1-2pm.
